Integration with Raspberry pi #734
RACHIT G. SHARMA (2026-04-01 10:56)
· 262 view(s)
· 2 comment(s)
I am working on integrating raspi-->Router-->laptop(Vital server)
this is the architecture is there any documentation regarding setting this up.
regards.
RACHIT G. SHARMA (2026-04-01 13:54)
Also when trying to connect it to a Servo I with
Config File:
SAVEDIR=/home/Desktop/Recording
SHOW_DSA=1
VRCODE=na6vykrwn
[BED/na6vykrwn]
[DEV/Servo-i]
port=dev/ttyUSB0
type=Servo-i
servo failed to start
Config File:
SAVEDIR=/home/Desktop/Recording
SHOW_DSA=1
VRCODE=na6vykrwn
[BED/na6vykrwn]
[DEV/Servo-i]
port=dev/ttyUSB0
type=Servo-i
servo failed to start
RACHIT G. SHARMA (2026-05-13 09:28)
in the newer version too it fails even when i creates the conf file on its own upon cinnecting to the vent the device is not recognized it only loops on waiting for the next patient