Nihon Kohden PVM-4700 (Vismo)

Nihon Kohden PVM-4700 (Vismo)

Note: Use Vital Recorder 1.19.34 or later. This connection supports numeric data only. Waveforms are not transmitted over RS-232C.

CableAdapterPortVR Device Name
Direct serial cableNull Modem (M/F)RS-232C connector on the QI-470P interfacePVM

Connection Requirements

  1. Confirm with Nihon Kohden which interface board is installed on the monitor before ordering or connecting the cable. This page assumes the QI-470P RS-232C interface; if it is not installed, contact Nihon Kohden to arrange installation.
  2. Use Vital Recorder 1.19.34 or later.

Connection Steps

  1. Connect a direct serial cable to the RS-232C connector on the QI-470P interface, using null modem adapter (M/F).

Device Configuration

No changes to the monitor settings are required.

Vital Recorder Setup

  • Add the device as PVM and select the PC serial port used for the connection.