đź–¨ Print / Save as PDF
OBELAB NIRSIT-ON+ (fNIRS)
OBELAB NIRSIT-ON+ (fNIRS)
Cable
Adapter
Port
VR Device Name
USB-Serial converter (USB end into the device)
Not confirmed
USB-A port
NirsitON
Connection Steps
Plug the USB end of a USB-Serial converter into the USB-A port on the rear of the NIRSIT ON+.
Use an additional direct serial cable to connect the converter’s DB-9 end to the PC’s serial port.
If the PC has no serial port, connect the cable to the PC through a second USB-Serial converter.
Device Configuration
Serial output settings :
115200 baud, 8 / None / 1
.
On the NIRSIT ON+, press Calibrate. Data transmission begins when calibration starts.
Vital Recorder Setup
Add the device as
NirsitON
.