Edwards Lifesciences Vigilance

Edwards Lifesciences Vigilance

Note: Digital port configuration is required before use. See Device Configuration below.

CableAdapterPortVR Device Name
Direct SerialNull Modem M/FCOM1 (or COM2)Vigilance

Connection Steps

  1. Attach a Null Modem (M/F) to COM1.
  2. Connect a direct serial cable from the adapter to the PC via USB-Serial converter.
Vigilance — rear COM ports

Device Configuration

  1. Press Setup → System Config → Return → Digital Ports.
System Config → Digital Ports
  1. Configure COM1:

| Parameter | Value | |-----------|-------| | Device | IFMout | | Baud Rate | 9600 | | Parity | None | | Stop Bits | 1 | | Data Bits | 8 | | Flow Control | 2 seconds |

Digital Ports configuration