Edwards Lifesciences Vigilance II

Edwards Lifesciences Vigilance II

Note: Serial port configuration is required before use. See Device Configuration below.

CableAdapterPortVR Device Name
Direct SerialNull Modem M/FPort 1 — top of two serial portsVigilance

Connection Steps

  1. Attach a Null Modem (M/F) to Port 1 (top serial port).
  2. Connect a direct serial cable to the PC via USB-Serial converter.
Vigilance II — Port 1

Device Configuration

  1. Press Setup → Serial Port Setup → Port 1.
Port 1 selection
  1. Set Device → IFMout and Baud Rate → 9600.
IFMout + 9600 baud