MDMS ANI Monitor V2

MDMS ANI Monitor V2

Note: After installing the sensor, press "New Patient" and wait approximately one minute for the initialization screen before connecting.

CableAdapterPortVR Device Name
NEXT USB 2.0 to SERIAL [NEXT-RS232U20]NoneSerial port (right side)ANIMonitor2

Connection Steps

  1. Install the sensor → press New Patient → wait ~1 minute.
ANI Monitor initialization screen
  1. Connect NEXT-RS232U20 to the serial port on the right side of the device.
Serial port — right side
  1. Connect the USB end to the PC.