Drager Infinity C500 / C700

Drager Infinity C500 / C700

Note: No additional device configuration required.

CableAdapterPortVR Device Name
Custom RJ10 ↔ DB-9F (numeric)NoneP2500 RJ10 portInfinity
Analog/Sync cable → MDR14 to RJ45 (waveform)NoneAnalog/Sync portInfinity

Connection Steps — Numeric Data

  1. Prepare a cable: RJ10 pins 3, 2, 4 → DB-9F pins 2, 3, 5.
  2. Connect the RJ10 end to the P2500 RJ10 port.
  3. Connect the DB-9F end to the PC via USB-Serial converter.

Connection Steps — Waveform Data

  1. Obtain an Analog/Sync cable.
  2. Fabricate an MDR14 to RJ45 cable per the pin diagram to connect to the ADC.