GE Corometrics 170

GE Corometrics 170

Note: Requires device configuration via setup mode. See Device Configuration below.

CableAdapterPortVR Device Name
Direct SerialNoneRS232 Port 1 or 2Coro

Connection Steps

  1. Connect a direct serial cable to RS232 Port 1 (or Port 2) on the device.
  2. Connect the other end to the PC via USB-Serial converter.

Device Configuration

To enter setup mode: hold the setup button (clock/calendar icon) while pressing the power button. Keep holding throughout the setup process.

  1. Use the UA Reference button to activate settings for FHR or UA display.
  2. Set values using the volume button:

| Port | Setting | FHR Display | UA Display | |------|---------|-------------|------------| | RS232 Port 1 | Communication mode | 30 | 5 | | RS232 Port 1 | Baud rate | 40 | 96 | | RS232 Port 2 | Communication mode | 31 | 5 | | RS232 Port 2 | Baud rate | 41 | 96 |