Nihon Kohden PVM-4700 (Vismo)
Note: Use Vital Recorder 1.19.34 or later. This connection supports numeric data only. Waveforms are not transmitted over RS-232C.
| Cable | Adapter | Port | VR Device Name |
|---|---|---|---|
| Direct serial cable | Null Modem (M/F) | RS-232C connector on the QI-470P interface | PVM |
Connection Requirements
- Confirm with Nihon Kohden which interface board is installed on the monitor before ordering or connecting the cable. This page assumes the
QI-470PRS-232C interface; if it is not installed, contact Nihon Kohden to arrange installation. - Use Vital Recorder 1.19.34 or later.
Connection Steps
- Connect a direct serial cable to the RS-232C connector on the QI-470P interface, using null modem adapter (M/F).
Device Configuration
No changes to the monitor settings are required.
Vital Recorder Setup
- Add the device as
PVMand select the PC serial port used for the connection.