Vital Recorder Version Notes (device-related)

Vital Recorder Version Notes (device-related)

Run the latest Vital Recorder. The official version history is the complete release record. This page summarizes changes that add device support or change collected data; other release changes are listed in the official history. Entries older than about two years are omitted.

VersionDateDeviceChange
1.19.342026-10-06Nihon Kohden PVM-4700New PVM entry for the Vismo PVM-4700 series. Numerics are collected over RS-232C.
1.19.342026-10-06Nihon Kohden BSM-3000/6000, CSM-1500/1700Units that recorded nothing over serial now record numerics: Vital Recorder falls back to a request these models accept.
1.19.322026-10-05Philips IntelliVueauto_wavs=0 (device-dialog checkbox) requests only the selected waveforms. By default a waveform is added for every numeric present.
1.19.272026-09-05TwitchView, TOFscanSerial auto-detection (AUTO_DETECT=1) now waits long enough for these monitors, which report only every ~5 min.
1.19.222026-08-30Dräger (MEDIBUS)Machines selectable by model (Fabius added) plus a generic Medibus entry; Primus, Fabius and Medibus behave identically. Auto-detection identifies Dräger machines by protocol, not model.
1.19.202026-08-29SyncPulseSerialNew device: sync pulse generator sending a 6-digit counter every second, recorded in the PULSE track.
1.19.202026-08-29Dräger Fabius GSMachines with no waveform capability now record numerics (previously nothing was collected). Fabius has AWP/AWF but no CO2 waveform.
1.19.192026-08-27Dräger (MEDIBUS)New tracks: ventilation phase VENT_PHASE, mode VENT_MODE, device messages VENT_MSG.
1.19.15 – 1.19.182026-08-27Dräger (MEDIBUS)Waveforms are requested from the list the machine offers, up to 4 (previously fixed to CO2 and AWP); wavs= selects specific ones (AWP AWF PLETH VOL O2 CO2 …). On Y-cable taps the waveform type is auto-detected when the other device's requests are visible (1.19.18); otherwise wavs= fixes it (1.19.17).
1.19.72026-08-12GE CorometricsMaternal SpO2 / PR / NIBP recorded alongside fetal HR1/HR2 and UACT.
1.19.02026-08All serial devicesAUTO_DETECT=1 — serial devices identified automatically.
1.18.492026-07-29Maquet Flow-i11 set-parameters added; TV no longer reported at half value (Set TV removed in protocol v5).
1.16.32026-01-14MasimoIAP protocol fix.
1.14.92024-10-17Fresenius Link+Hardware handshaking removed from the Link+ port; dose-rate monitor types added.