OBELAB NIRSIT-ON+ (fNIRS)

OBELAB NIRSIT-ON+ (fNIRS)

CableAdapterPortVR Device Name
USB-Serial converter (USB end into the device)Not confirmedUSB-A portNirsitON

Connection Steps

  1. Plug the USB end of a USB-Serial converter into the USB-A port on the rear of the NIRSIT ON+.
  2. Use an additional direct serial cable to connect the converter’s DB-9 end to the PC’s serial port.
  3. If the PC has no serial port, connect the cable to the PC through a second USB-Serial converter.

Device Configuration

  • Serial output settings : 115200 baud, 8 / None / 1.
  • On the NIRSIT ON+, press Calibrate. Data transmission begins when calibration starts.

Vital Recorder Setup

  • Add the device as NirsitON.